1.Widely used in the areas such as stainless steel fasteners,chains.kitchen and sanitarywares, furniture handles,handrail,electroplating and electrolyzing pendants, food, electro, petroleum, construction and decoration,etc.
2.electronic products parts,medical appliances,springs,bus inside and outside packing and building, street lamp posts, etc.decoration materials and outdoor publicity billboard.used for the products which have the anti-stress corrosion requirement.electron products,table-wares, bolts, nuts, screen mesh, combustor and so on.
Condition of delivery
Austenite in solution, ferrite in anneal or in accordance with client's detailed requirement
1 Metric ton
CIF or FOB Shanghai
L/C or T/T
25 Metric tons per day
7-30 days,according to the quantity.
Full wrap by plastic packing-cloth
NOTE: ABOUT OUR SECONDARY STAINLESS STEEL COIL
1, Quantity: we keep more than 500 Tons of secondary stainless steel coils in stock
2, Our warehouse in Taiyuan City, We can only supply secondary stainless steel coils of TISCO
3, Packing of our material is surround by waterproof paper
4, Quality of our products is no problem, there's only some problems on the surface or edge.
5, we accept any inspection on the quality. (Chemical composition)
Type 316/316L is a molybdenum-containing austenitic stainless steel intended to provide improved corrosion resistance relative to Type 304/304L in moderately corrosive process environments, particularly those containing chlorides or other halides. Type 316/316L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
Food preparation equipment, especially in chloride environments
Chemical processing, equipment
Laboratory benches and equipment
Rubber, plastics, pulp & paper machinery
Pollution control equipment
Boat fittings, value and pump trim
Pharmaceutical and textile industries
Condensers, evaporators and tanks
Generally more resistant than 304 in range of atmospheric environments and many corrosive media due to the increased chromium
and molybdenum content.
Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 122°F (50°C).
Considered resistant to potable water with up to about 1000mg/L chlorides at ambient temperatures, reducing to about 500mg/L at
Usually regarded as the “marine grade stainless steel” – but is not resistant to warm sea water.
Good oxidation resistance in intermittent service to 1600°F (870°C) and in continuous service to 1700°F (925°C)
Grade 316L is more resistant to carbide precipitation.