Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil,
Thailand, Korea, Iran, India, Egypt, Oman, Malaysia, etc
Stainless steel plate applies to construction field, ships building industry,
petroleum,chemical industries, war and electricity industries, food processing
and medical industry,boiler heat exchanger, machinery and hardware fields. Stainless steel plate can be made
according to the customers requirements.
Mill Test Certificate is supplied with shipment, Third Part Inspection is
ISO, SGS, and third part inspection.
Waterjet Cutting is One of Our Main Cutting Method
A water jet cutter, also known as a water jet or waterjet, is an industrial tool capable of cutting a wide variety of materials using a very high-pressure jet of water, or a mixture of water and an abrasive substance. The term abrasivejet refers specifically to the use of a mixture of water and abrasive to cut hard materials such as metal or granite, while the terms pure waterjet and water-only cutting refer to waterjet cutting without the use of added abrasives, often used for softer materials such as wood or rubber.
Waterjet cutting is often used during fabrication of machine parts. It is the preferred method when the materials being cut are sensitive to the high temperatures generated by other methods. Waterjet cutting is used in various industries, including mining and aerospace, for cutting, shaping, and reaming.
six main process characteristics to water jet cutting
Uses a high velocity stream of Ultra High Pressure Water 30,000–90,000 psi (210–620 MPa) which is produced by an intensifier pump with possible abrasive particles suspended in the stream.
Is used for machining a large array of materials, including heat-sensitive, delicate or very hard materials.
Produces no heat damage to workpiece surface or edges.
Nozzles are typically made of sintered boride.
Produces a taper of less than 1 degree on most cuts, which can be reduced or eliminated entirely by slowing down the cut process or tilting the jet.
Distance of nozzle from workpiece affects the size of the kerf and the removal rate of material. Typical distance is .125 in (3.2 mm).