Grade 430 / 1.4016 Thin Stainless Steel Sheet NO.4 Finish For Elevator
WINFAST STEEL INDUSTRIAL LIMITED has a 6000 MT/month production capacity that covers AISI 200-series, 300-series, and 400-series stainless steels with different hardnesses, surfaces, or other special requirements for cold-rolled stainless steel. Two lines of fly shears from Taiwan process coils to sheets at 70 m/min, with thicknesses ranging from 0.1 mm to 1.0 mm, widths ranging from 200 mm to 800 mm, and lengths ranging from 200 mm to 2500 mm.
The 430 stainless steel sheets are a ferritic, low-carbon stainless steel. They have good corrosion resistance in a mildly corrosive environment and good oxidation resistance at elevated temperatures. These sheets have limited weldability, and edge welds are not recommended. The 430 stainless-steel sheets have excellent polishing characteristics and are used in a variety of decorative applications.
5 to 12 working days after the receipt of 30% deposit
30%TT for deposit, 70% balance before shipment or LC at sight
Wooden pallet or according to customer's request
Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Chemical Composition of our 430 stainless steel sheets GradeN
Mechanical properties of grade 430 stainless steels
Tensile Strength (MPa) min
Yield Strength 0.2% Proof (MPa) min
Elongation (% in 50mm) min
Rockwell B (HR B) max
Brinell (HB) max
Grade specifications for 430 stainless steels
The following are the applications for stainless steel grade 430:
Dish washer linings
Refrigerator cabinet panels
Element supports and fasteners
Stove trim rings and chimney liners
Automotive trim and lashing wires
Products process equipment
Our surface grinding platform include whole roll of oily sand, flat dry sand, etc., which mainly produces no.4, HL, SB, Dupula and other styles, and provides sample customization service. The platform has achieved full range processing capability from cold rolling to hot rolling, from sheet to medium plate, from flat plate to rolled plate, from dry grinding to oil grinding.
single grinding line for thin sheet
we can process:NO.4 ,HL,SB,NO.4S,Dupula
single grinding line for thick plate
About our process line
There are nine single plate grinding equipment, which are imported from Italy and Japan respectively. The maximum machining width is 4200mm, the maximum processing length is 12000mm, and the thickness processing range is 0.3-200mm. It is the equipment with the highest grinding thickness in China. In the middle and thick plate grinding, it can ensure the smooth grinding of the surface, no dead Angle, dust and particle pollution. The product quality completely achieves the same effect with the cold rolled surface as the base material processing.