Material Grade	201/202/301/303/304/304L/316/316L/321/310S/401/409/410/420J1/420J2/430/439/443/444/2205/2507
Standard	JIS/JIS/SUS/GB/DIN/ASTM/AISI/EN
Surface	2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect
Technique	Cold Rolled; Hot Rolled
Length	2000mm, 2438mm, 2500mm, 3000mm, 6000mm or as required
Width	1000mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm
Thickness	0.3-4mm cold rolled; 3-16mm hot rolled; 16-100mm hot rolled; Customized according to customer requirements
Applicaiton	nterior/Exterior decoration; Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure;Shipbuilding
Trade Terms	EXW,FOB,CIF, CFR
Loading Port	Shanghai port, Tianjin port, Qindao port
Payment terms	1)TT 30 % deposit in advance and balance 70%TT before delivery.
	2) 30% deposit by T/T, the balance by L/C at sight.
	3) 100% L/C at sight.
MOQ	1Ton
Packing Detail	Wooden Pallet or according to customer's requirements
Delivery time	1.Usually,within10-20days after receiving deposit or LC. 2.According to the order quantity

Alloy Series	Typical Alloy	Introduction
1000 Series	1050 1060 1070 1100	Industrial Pure Aluminium. In all series, 1000 series belongs to the series with the largest aluminium content. The purity can reach over 99.00%.
2000 Series	2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17	Aluminium-copper Alloys. 2000 series is characterized by high hardness, in which the content of copper is the highest, about 3-5%.
3000 Series	3A21, 3003, 3103, 3004, 3005, 3105	Aluminium-manganese Alloys. 3000 series aluminium sheet is mainly composed of manganese. The manganese content ranges from 1.0% to 1.5%. It is a series with better rust-proof function.
4000 Series	4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A	Al-Si Alloys. Usually, the silicon content is between 4.5 and 6.0%. It belongs to building materials, mechanical parts, forging materials, welding materials, low melting point, good corrosion resistance.
5000 Series	5052, 5083, 5754, 5005, 5086,5182	Al-Mg Alloys. 5000 series aluminium alloy belongs to the more commonly used alloy aluminium series, the main element is magnesium, the magnesium content is between 3-5%. The main characteristics are low density, high tensile strength and high elongation.
6000 Series	6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02	Aluminium Magnesium Silicon Alloys. The representative 6061 mainly contains magnesium and silicon, so it concentrates the advantages of 4000 series and 5000 Series. 6061 is a cold-treated aluminium forging product, which is suitable for applications requiring high corrosion resistance and oxidation resistance.
7000 Series	7075, 7A04, 7A09, 7A52, 7A05	Aluminium, Zinc, Magnesium and Copper Alloys. The representative 7075 mainly contains zinc. It is heat-treatable alloy, belongs to super-hard aluminium alloy, and has good wear resistance. 7075 aluminium plate is stress-relieved and will not deform or warp after processing.

Contact Person :	jack
Tel :	13925019825
Fax :	86--13952469678

0.2mm 4mm Aluminium Coil 6061 5052 ISO Passed

6061 aluminium coil

4mm aluminium coil

0.2mm 5052 aluminum coil

Quality Guaranteed 0.2Mm/4Mm Aluminum 6061 Al5052 Alloy Foil Factory Aluminum Coil Spring